Lotus 1-2-3 for DOS R2.3/2.4 Wysiwyg Driver Here is your 1-2-3 for DOS Release 2.3 and 2.4 Update package to install a HP LaserJet 4Si/4Si MX printer driver used to create output from the Wysiwyg (:Print) publishing environment of 1-2-3 for DOS. This driver is not available in 1-2-3 native-mode (/Print) or PrintGraph. Lotus' driver for the HP LaserJet 4Si/4Si MX printer is enhanced to support PCL5 and HP-GL/2 to take advantage of internal scalable fonts and vector graphics drawing for superior performance. Lotus and HP have worked closely together to ensure that as many of the new capabilities of the HP LaserJet 4Si/4Si MX printer as possible are supported by 1-2-3 for DOS. Lotus and Hewlett-Packard hope that the HP LaserJet 4Si/4Si MX printer driver meets your needs. HP LaserJet 4Si/4Si MX Printer Features Supported: Fonts On Board Scalable Font Selection CG Times, Univers, Albertus, Antique Olive, Garamond Antiqua, CG Omega HP-GL/2 Full Vector Graphics Drawing True Text Rotation PJL Support PCL5 Language Switching Paper Handling Two Input Bins INSTALLATION NOTES: Before proceeding with the update, please make sure there is at least 1.3 megabytes of hard disk space available on the disk containing your 1-2-3 program. This amount of disk space is required temporarily to allow the update to create copies of the files that will be modified. This is done to insure that the integrity of all files being affected remains intact during the update procedure. To install the driver from the Printer Driver disk, follow these instructions: 1. Insert the Update disk in drive A: (or B:) 2. At the operating system prompt, type A: (or B:) and press ENTER to make A: (or B:) the current drive. 3. At the prompt, type DRIVE4Si A) At the main menu, select Lotus 1-2-3 Version 2.3, 2.4 B) Select Copy Driver File(s) C) Enter the path of your Release 2.3 or 2.4 directory, and then press ENTER. For example, if you have Release 2.3 and your directory is C:\123R23, you would type C:\123R23 and then press ENTER. When the update is complete, the following message appears: "To take advantage of the new printer driver, you must now run the 1-2-3 Install program." 4. You must now run the Install program. Follow the instructions in chapter 4 of Getting Started (if you have Release 2.3) or chapter 5 of Getting Started (if you have Release 2.4) to start Install. A) In the 1-2-3 Install program, choose "Change selected equipment" and then choose "Add New Drivers to the Library" and identify the drive A: (or B:) containing this Update disk. When Install indicates that it has completed adding the new drivers, choose "Return to Main Menu". B) Choose "Select Your Equipment" from the Install Main Menu and follow the instructions on the screen. The new printer driver provided on this disk is a "Graphics printer", its name will appear in Install's menu as: "HP LaserJet 4Si PCL5" C) Make sure you select "Yes" when Install asks if you want to "Generate Fonts". If you have multiple driver sets, you must recreate each driver set using "Select Your Equipment". ============================================================================= APPLICATION NOTES: 1-2-3 for DOS will automatically use internal scalable typefaces resident in your printer when you select to use the "HP LaserJet 4Si PCL5" driver in Wysiwyg, the publishing environment which is part of 1-2-3 for DOS. If you have a 1-2-3 spreadsheet which you would like to try printing with your new HP LaserJet 4Si/4Si MX printer driver, just "/File Retrieve" it. Make sure that you select the appropriate driver and interface through Wysiwyg's ":Print" menu or through the dialog box. Then choose ":Print Range Set", and when your printer is ready, choose ":Print Go". Refer to your 1-2-3 User's Guide if you need more information on printing with 1-2-3's Wysiwyg or the ":Print" menu(s). The following fonts in 1-2-3's Wysiwyg display will automatically map to your HP LaserJet 4Si/4Si MX printer: Swiss => CG-Universe Dutch => CG-Times You can also select the HP LaserJet 4Si/4Si MX printer fonts by name through the Wysiwyg menu ":Format Font Replace (1-8) Other". Then: "Select the typeface" "Fontsize in points" Please keep in mind that 1-2-3's Wysiwyg display can not show you the actual font available on your printer. Moreover, you may notice that the spacing between characters changes on screen when you've selected to use a font available in your HP LaserJet 4Si/4Si MX printer. This is done to indicate the width of characters as they will appear on your printed output. HP LaserJet 4Si/4Si MX Printer Fonts Selectable Through Wysiwyg: CG Times HP-TIMES.IFL Univers HP-UNVRS.IFL Albertus HPALBERT.IFL Antique Olive HPANTOLV.IFL Garmond Antiqua HPGARAMD.IFL CG Omega HPOMEGA.IFL =========================================================================== (C)opyright 1992, Lotus Development Corporation All rights reserved =========================================================================== SPECIAL NOTES: If you are using Virus Scanning Software This modification will alter existing files, which may cause a virus checking program to report a virus. If you are using a virus scanning program that is memory resident, you may wish to disable the resident virus scanner before proceeding with the update, and re-enable it afterwards. If you are using a non-memory resident virus scanning program that maintains a record of files on your disk, you may receive a report that some files in the 1-2-3 directory you updated have been modified since they were was last scanned. You may wish to have the virus scanner re-scan your 1-2-3 directory immediately following this modification in order to update the record of the 1-2-3 files. =========================================================================== ERROR MESSAGES "ERROR: There is not enough free disk space. 1.3MB of free disk space is temporarily needed to perform the update." This indicates that insufficient disk space is free on the drive containing the 1-2-3 files you are updating. 1.3 megabytes of disk space is required temporarily to allow the update to create copies of the files that will be modified. This is done to insure that the integrity of all files being affected remains intact during the update procedure. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º IMPORTANT NOTE: IF YOU UPGRADE YOUR 1-2-3 RELEASE 2.3 TO A MORE º º RECENT COPY OF 1-2-3 REL 2.3, OR TO 1-2-3 REL 2.4, º º THE LASERJET 4Si DRIVER MUST BE RE-INSTALLED º º USING THE UPDATE COMMAND, AND 123 INSTALL. º º RETAIN THIS DISK FOR THAT PURPOSE. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If displayed, this indicates that the UPDATE command has identified that the original version of 1-2-3 release 2.3 is installed, and has made the appropriate version of the HP LASERJET 4Si/4Si MX driver available. You are warned that, if in future, you upgrade to a more recent version of 1-2-3 release 2.3 or 1-2-3 release 2.4, you must run the UPDATE procedure again followed by 1-2-3 Install. Retain the disk for that purpose. =========================================================================== [v.7.31.E]